An 83-layer alumina ceramic head, 42mm tall. Four were fabricated
side-by-side in parallel. Click on the image to see it full-size.
|
An early 300-layer paper model hand-assembled using registration
bolts:
|
Turbine blade section made directly in alumina ceramic.
|
Bone from the femur of a dog, made from alumina ceramic in 75
layers.
|
A three-layer ceramic component with in inner serpentine fluid channel
and inlet and outlet ports. A ten-layer device with five interior serpentine
channel layers (a continuous channel length of nearly 10m) has also been
fabricated.
|
Alumina ceramic component, 50 mm diameter, 12 mm high.
|
Silicon Nitride disc, 52 mm diameter, 3 mm high.
|
A 46-layer ceramic flange component: the original alumina "green"
unfired component is on the left, and shown after firing fully densified
at right.
|
